60V65Ah battery "JW Limited Edition" / SUR-RON Light Bee

The first thing to know is that to know the autonomy of a battery, you don't just have to look at the amps. The capacity of a battery is calculated by V x Ah. This is why a 60V60Ah will have the same autonomy as a 72V50Ah, because both have 3600Wh capacity. But be aware that the more power you use, the more Volt it will take to have great autonomy.

The higher the nominal voltage, the less the controller and motor will heat up. So, the higher voltage you have, the more power you will be able to use. The power of a 60V will start to "run out of steam" from 40kmh for example, while a 72V will continue to deliver maximum power up to 60kmh.

Our 60V battery is compatible with the original controller and charger. You can also benefit from more power with a specific controller since our 60V battery can deliver up to 12Kw (20Kw in 50S).

Our 66V battery allows a power gain of approximately 10 to 15% while being compatible with the original controller. You will also be able to benefit from more power since our 66V batteries can deliver up to 12Kw (25Kw in 50S) with a specific controller.

Our 72V battery is the choice to make if you want to ride with great power. It will allow you to benefit from the full performance of the battery while limiting motor and controller heating and thus benefit from maximum autonomy while being compatible with a large number of controllers.

Our 80V battery is designed for those wishing to ride at high speed. If you have an 80V compatible controller, then go for it. You will have great autonomy, maximum power and minimum heating.

The 50LT cells offer an excellent performance/price ratio while the Samsung 50S are those which offer the best power/autonomy ratio. Even if the Samsung 50S allows you to benefit from 25Kw, you must understand that with equivalent power, they will have better autonomy. The Samsung 50S will also be able to retain their power much longer when the battery discharges. This is related to Voltage SAG. When we draw power into the cells, the voltage will drop and therefore arrive more or less quickly at the threshold where the battery will lose power. In any case, you will have a battery with very good cells and above all you need the battery adapted to your budget!

This is the big question that everyone would like to know the answer to before purchasing a battery. How many km will I do? You should know that answering this question is difficult since it will depend on the weight of the rider, the terrain, the elevation, the level of riding, the power used, etc...

However, to help you give you an idea, know that an original 60V32Ah battery has a capacity of 1920Wh. Our 72V50Ah battery has a capacity of 3600Wh.

So if you drove around 35/40km with the original battery you can imagine being able to cover around double the distance.

Our batteries are in any case entirely designed to provide you with maximum autonomy : more efficient cells, heat dissipation, optimization of assembly, copper lined with nickel...

To give you an idea : with our weight of 70kg equipped, a power of 15Kw and a very sporty outing we did 60km with 2500m of elevation gain ! With a slightly more leisurely pace but still with 15kw we are around 65/70Km with still 2000 D+!

Our batteries equipped with 50LT cells can provide 15Kw and 25KW in Samsung 50S .

So don't hesitate any longer and go try your bike on the hardest enduro trails or on cross-country terrain, because you will have to relearn how to ride your new bike. With so much extra power, be careful on your first ride!

In any case, don't worry about your battery, because it is equipped with a carefully configured BMS that takes care of monitoring all battery information in real time, such as cell block voltage or temperature probes. . If there is the slightest problem, the BMS will lower the power of the motorcycle, or even instantly cut off the power.

Our case is the result of a long development in order to obtain the high level of quality that we demanded. It is designed in three parts which will form this solid and reliable case: The top and bottom of the battery are 6000 aluminum plates machined from the mass, in order to have the highest level of resistance to withstand the weight of the cells and the shocks that the motorcycle may receive. The contours of the case are made of 2mm thick aluminum plates , covered with a black covering to enhance the box. The entire box is closed with numerous rivets and is fully sealed with silicone to provide a waterproof box. You thus have one of the best, if not the best, subwoofer on the market. It combines lightness and strength, while having a neat design . In addition, it is equipped with an air exchanger to help cool the battery and prevent condensation.